Pacific Northwest Four Wheel Drive Association

Pacific Northwest Four Wheel Drive Association (http://www.pnw4wda.org/forums/index.php)
-   Jeeps (http://www.pnw4wda.org/forums/forumdisplay.php?f=18)
-   -   1967 jeep gladiator build (http://www.pnw4wda.org/forums/showthread.php?t=1425)

warrpath4x4 01-17-2010 08:17 PM

1967 jeep gladiator build
 
1967 jeep J-3000 gladiator with the 327 vigilante motor, 4 speed, 4x4, 3/4 ton, traded a shotgun for it. it does need a little work but it runs. not 100% sure on the build plan yet but i am happy with the trade.

http://inlinethumb41.webshots.com/46...600x600Q85.jpg

http://inlinethumb09.webshots.com/44...600x600Q85.jpg

http://inlinethumb47.webshots.com/43...600x600Q85.jpg

http://inlinethumb35.webshots.com/52...600x600Q85.jpg

http://inlinethumb14.webshots.com/46...600x600Q85.jpg

http://inlinethumb39.webshots.com/43...600x600Q85.jpg

power steering reservoir

http://inlinethumb30.webshots.com/45...600x600Q85.jpg

http://inlinethumb31.webshots.com/42...600x600Q85.jpg

missing fender

http://inlinethumb54.webshots.com/46...600x600Q85.jpg

http://inlinethumb51.webshots.com/66...600x600Q85.jpg

http://inlinethumb42.webshots.com/40...600x600Q85.jpg

this "patch" job will be ripped out and fixed right

http://inlinethumb06.webshots.com/44...600x600Q85.jpg

Art Waugh 01-18-2010 07:52 AM

Tons of help and info can be found at www.ifsja.org (international full size jeep association) Tell 'em goldhammer sent ya.

warrpath4x4 01-18-2010 08:02 AM

Quote:

Originally Posted by Art Waugh (Post 10633)
Tons of help and info can be found at www.ifsja.org (international full size jeep association) Tell 'em goldhammer sent ya.



Already there, thanks

Art Waugh 01-18-2010 11:34 AM

Cool, but now you won't believe me when I try to tell you the grill setup is only worth about $50. Nice find. There is a beauty of a red one out by Durkee, and another with a flag motiff on the box side just east of Baker, after you get up the hill and on the flat.

warrpath4x4 01-18-2010 03:38 PM

I already picked up some parts today, electric fuel pump, block off plate (looks like a chevy one will work), new fuel filters, upper and lower radiator hoses, oil filter. The bellow inside the fuel pump broke and so its sending gas into the crankcase and oil into the fuel line.

Art Waugh 01-18-2010 05:21 PM

If you need a fender, and are not in a rush, I have access to a W/T cherokee, but don't know the condition of the tin. Looking like I might be in the Pendleton area toward the end of Feb for a RAC meeting.

warrpath4x4 01-18-2010 07:06 PM

Quote:

Originally Posted by Art Waugh (Post 10666)
If you need a fender, and are not in a rush, I have access to a W/T cherokee, but don't know the condition of the tin. Looking like I might be in the Pendleton area toward the end of Feb for a RAC meeting.


Sounds good, let me know when you find out. Thanks

warrpath4x4 01-23-2010 07:49 PM

got her up and running today, pulled the mechanical fuel pump and installed the electric one, and a block off plate. just have the fuel pump hooked upto a temporary toggle switch for now, just to get it up and running. it actually runs pretty smooth and feels like it has some power left in her. found out the front driveline is MIA so im hoping theres nothing wrong with the front axle or the transfercase.

i verified the axles are a 44 front and a 53 rear

http://inlinethumb28.webshots.com/31...600x600Q85.jpg

http://inlinethumb37.webshots.com/46...600x600Q85.jpg

well if i end up putting the chevy axles in with disc brakes all around, ill still have a park brake lol (and check out that exhaust lol)

http://inlinethumb46.webshots.com/20...600x600Q85.jpg

the PO cut the sides off the original wrap around bumper, atleast the pieces he cut off are in the bed

http://inlinethumb46.webshots.com/46...600x600Q85.jpg

http://inlinethumb05.webshots.com/16...600x600Q85.jpg

MTSHANK 02-22-2010 10:46 PM

any updates on the project?

JeepNirvana 02-23-2010 08:47 AM

Great Thread..:beer:


All times are GMT -7. The time now is 09:35 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.