Pacific Northwest Four Wheel Drive Association

Pacific Northwest Four Wheel Drive Association (http://www.pnw4wda.org/forums/index.php)
-   Garage (http://www.pnw4wda.org/forums/forumdisplay.php?f=61)
-   -   transfer case question (http://www.pnw4wda.org/forums/showthread.php?t=1560)

Dogfather 03-10-2010 06:24 PM

transfer case question
 
I have an S10 with a 2.8L 700R4 with a drivers drop 231

what Transfer case will bolt in place of that... I'm looking for a passanger drop

JK kat 03-13-2010 06:46 AM

would one out of a 884-86 cherokee work? as they had the same set-up i think

Art Waugh 03-13-2010 10:36 AM

If both the round NP pattern, but depends on the spline count and stick out. But all the XJ's were a driver drop. Might look to a 208 out of either a full size early 80's gm or maybe a dodge.

WHITE TRASH 03-14-2010 02:43 PM

231/241 out of a 80's dodge will work. Just have to swap out the input gear from 26 or 29 to the correct 27 spline that you need.


All times are GMT -7. The time now is 04:45 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.