Pacific Northwest Four Wheel Drive Association

Pacific Northwest Four Wheel Drive Association (http://www.pnw4wda.org/forums/index.php)
-   CJ's (http://www.pnw4wda.org/forums/forumdisplay.php?f=35)
-   -   project A.D.D. (http://www.pnw4wda.org/forums/showthread.php?t=1903)

warrpath4x4 07-13-2010 11:23 PM

project A.D.D.
 
Ok so where do i begin with this, i have been asked a couple times if i have A.D.D. so thats where i get the name and you will see why. I was building the powerwagon up and then found out on fathers day that i am going to be a dad. Well a single cab pickup just wasnt going to cut it, couldnt find a extended or club cab that i could rob the cab off of so i did a little measuring. With a little wheel base adjustments i can fit my CJ6 body onto the W200 powerwagon chassis.

From the powerwagon i will be using the chassis (frame, suspension, axles, trans, brand new engine), rear fuel tank that will be moved.

From the CJ6 i will be using basicly just the body, tub, windshield, and hood. I will place the grill where i need it to clear the engine, build tube fenders, and stretch the hood to where i need it.

Of course theres alot more to this plan but im sure you all want pics.

http://i944.photobucket.com/albums/a...ct%20ADD/1.jpg

http://i944.photobucket.com/albums/a...ct%20ADD/2.jpg

http://i944.photobucket.com/albums/a...ct%20ADD/3.jpg

http://i944.photobucket.com/albums/a...ct%20ADD/6.jpg

yup there is carpet screwed down to the floors

http://i944.photobucket.com/albums/a...t%20ADD/10.jpg

http://i944.photobucket.com/albums/a...t%20ADD/11.jpg

jeep sat for a while, check out that pipe and elbow roll bar

http://i944.photobucket.com/albums/a...t%20ADD/14.jpg

pulled the carpet and seat out (which was held in by 2 bolts and a structural 2x4 lol), there was less damage than i thought there would be

http://i944.photobucket.com/albums/a...t%20ADD/19.jpg

first time getting to open the tool box

http://i944.photobucket.com/albums/a...t%20ADD/18.jpg

pulled the hood off and started to clean the hinges and the hood

http://i944.photobucket.com/albums/a...t%20ADD/24.jpg

from what i can tell there is about 8 coats of paint on this thing, im not planning on taking it all down to bare metal but i will be taking it down a few. i also cut out the first of many holes and rust spots, no rust in the hood but there were a couple ripped open areas.

http://i944.photobucket.com/albums/a...t%20ADD/25.jpg

poorboy_616 07-13-2010 11:37 PM

I just saw this over at L4J too. Looks like a sweet build!

Ceg_ 07-14-2010 09:57 AM

Cool project Jeep.

warrpath4x4 07-14-2010 10:24 AM

Thanks, I just realized I didn't put any of the powerwagon pics in. Ill have to try to fix that tonight and maybe a spec sheet.

warrpath4x4 07-15-2010 09:32 PM

well i will be out of town this weekend so nothing will be getting done on the jeep so heres some old shots and a spec list of the project.

65 CJ6 tuxedo park model
crate 360
nv435/np205
HD44/dana 60 rear
dual batteries
dual winches
yadda yadda yadda

seats im going to run in the front
http://i944.photobucket.com/albums/a...20ADD/0053.jpg

cleaned up exhaust manifolds
http://i944.photobucket.com/albums/a...0ADD/00414.jpg

dirty frame
http://i944.photobucket.com/albums/a...0ADD/00419.jpg

cleaned up frame
http://i944.photobucket.com/albums/a...0ADD/00316.jpg

getting rid of the body pieces
http://i944.photobucket.com/albums/a...t%20ADD/23.jpg

warrpath4x4 07-26-2010 10:11 PM

ive been working on paint removal after work 5 and 10 minutes at a time.

before
http://i944.photobucket.com/albums/a...%20ADD/003.jpg

paint removed and welded up a bunch of little holes
http://i944.photobucket.com/albums/a...%20ADD/004.jpg
http://i944.photobucket.com/albums/a...%20ADD/006.jpg

painted
http://i944.photobucket.com/albums/a...%20ADD/007.jpg

http://i944.photobucket.com/albums/a...%20ADD/008.jpg

the fenders are pretty beat up but if anyone is interested in them just let me know
http://i944.photobucket.com/albums/a...%20ADD/009.jpg

last look at the sponge bob grill
http://i944.photobucket.com/albums/a...%20ADD/010.jpg


All times are GMT -7. The time now is 11:40 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.