Pacific Northwest Four Wheel Drive Association

Pacific Northwest Four Wheel Drive Association (http://www.pnw4wda.org/forums/index.php)
-   Vendors (http://www.pnw4wda.org/forums/forumdisplay.php?f=49)
-   -   Weld on Beadlocks (http://www.pnw4wda.org/forums/showthread.php?t=2778)

T M I 01-28-2012 03:03 PM

Weld on Beadlocks
 
Total Metal Innovations is manufacturing Weld-on Beadlocks in the Pacific Northwest.

CNC Cut Weld-on Beadlocks standard and custom designs.

32 bolt Rings. Hardware (bolts, nuts, washers) not included.

$200 for a set of beadlocks for 4 wheels with the standard designs (#1-12).

15 Inch standard designs set to install on 4 wheels $200

16 Inch standard designs set to install on 4 wheels $210

16.5 Inch standard designs set to install on 4 wheels $220

17 Inch standard designs set to install on 4 wheels $230

18 Inch standard designs set to install on 4 wheels $250

20 Inch standard designs set to install on 4 wheels $275

Custom Design pricing on a per design basis. Most Designs even custom are included at the prices listed above.

1/4" thick steel rings

We can also fill your custom bracket and tab needs.

Total Metal Innovations 541-223-8608

For OFFROAD USE ONLY. All welding should be completed by a certified welder.

There is a 1-3 business day lead time on these.


http://img.photobucket.com/albums/v6...EELS1small.jpg

http://img.photobucket.com/albums/v6...EELS2small.jpg

http://img.photobucket.com/albums/v6...EELS3small.jpg

http://img.photobucket.com/albums/v6...4006942908.jpg

http://img.photobucket.com/albums/v6...7553979155.jpg

http://img.photobucket.com/albums/v6...5723110494.jpg

http://img.photobucket.com/albums/v6...1762184365.jpg

http://img.photobucket.com/albums/v6...62860816_n.jpg

http://img.photobucket.com/albums/v6...6129738184.jpg

T M I 01-28-2012 03:17 PM

Forgive me if we need to become a vendor I did not see a area to do so. If so please send me info on becoming a vendor on the forum.

Total Metal Innovations is also looking for a few events in our local area to DONATE some weld on beadlocks for a worthy cause.

Thank you,

Tyler

Total Metal Innovations

jim putman 01-28-2012 04:12 PM

Winter convention is right around the corner. Its our largest meeting of the year. You might contact Kyle (his info is on the front page) about setting up a vendor spot and donating a set of your beadlocks for the raffle. Welcome to the site :wave:

T M I 01-28-2012 05:59 PM

Quote:

Originally Posted by jim putman (Post 18205)
Winter convention is right around the corner. Its our largest meeting of the year. You might contact Kyle (his info is on the front page) about setting up a vendor spot and donating a set of your beadlocks for the raffle. Welcome to the site :wave:

Thank you for the info. I just send Kyle a email about both subjects at hand.


All times are GMT -7. The time now is 08:35 PM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.