Pacific Northwest Four Wheel Drive Association

Pacific Northwest Four Wheel Drive Association (http://www.pnw4wda.org/forums/index.php)
-   Swapmeet (http://www.pnw4wda.org/forums/forumdisplay.php?f=58)
-   -   78 cj5 project parting (http://www.pnw4wda.org/forums/showthread.php?t=2855)

cda78cj 03-13-2012 12:41 PM

78 cj5 project parting
 
I am parting way with a project its 1978 cj5. I have title
$250 for frame, its bare i have front leaf brackets for outboarding leafs and flipping shackles to rear, ill weld on for buyer
$200 for tub bare just tub
$150 for tub, from firewall to floor under dash complete and bed is good the rest is junk in my opinion.

$500 obo for ford 5.0 h.o. out of a 92 f150, i tore down inspected and resealed and put in the following, oil pump, camshaft from delta cam and rods, timing chain n gears, water pump, it is complete with wire harness and ecu

$100 obo for winshield frame

$200 for ford belhousing and adapter from novack conversions in box to mate ax15 to 5.0 engine

$100 for hood it has dents
$100 grill with headlights

$$best offer

$250 obo 4" yj leafs new that i was gona run in front
text Chad at 253-720-6513. Email cda89xj@yahoo.com
The more ya buy the better deal ill make ya

Jacob 03-14-2012 07:05 AM

Called and PM'd you about the tubs.

cda78cj 03-15-2012 08:51 AM

Pending trade for a rig. Ill post pics of parts if deal falls through.

Jacob 03-17-2012 08:31 PM

When you decide about selling the tubs, let me know. I have the money in my wallet. If they are in good enough shape for what I am looking for I can pick them up almost any evening. I am the guy that called you and talked to you about them. I will PM you my number just in case.

cda78cj 03-18-2012 07:14 PM

10 Attachment(s)
here are some pics, minus engine its in garage still
Jacob has dibs on tubs since my trade fell through

dana300 with adapter/clocking plate from novack conversions to bolt to ax15 along with twin stick

ax15

ford belhousing and NC adapter for belhousing and input shaft to 5.0 still in box

cj5 cage

new knobs and dash markers

black container has odd and ends like mirror, brackets ect that came with tub when I baught it

4'' yj leafs new havent been used

NC motor mounts for cj5 frame bolt on to mount 5.0 engine

I have a lot of stuff, heck even a set of 4 bfg mt 12.5x15x35 with 70% tread

also have 2.5'' body radflow 16'' travel airshocks ill part with for the right price, havent installed just charged to 275psi nitrogen

:friday::friday: I am looking for a k5 with a 350 v8, th350,400,700r4 or manual tranny and a np205 tcase, runs n drives.

Jacob 03-18-2012 09:33 PM

I'll call you about setting up a time to come look at them. It will have to be before Thursday this week or sometime after April 2nd. My Inlaws will be here and I most likely won't be able to get away. Then on the 31st and 1st I will be at Evans creek.

cda78cj 03-18-2012 09:38 PM

Ok no problem . I never recieved ur pm but im off tomorrow and any evening after 530 is good for me. Im out in puyallup/s.h.

cda78cj 04-03-2012 05:28 PM

No one wants this stuff ...... come on lol i need room any fair offers

Dave McMains 04-04-2012 10:07 AM

So what is left?

cda78cj 04-04-2012 02:27 PM

Everything.


All times are GMT -7. The time now is 04:12 AM.

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.