Thread: Wiring help?
View Single Post
  #5  
Old 06-13-2010, 02:03 PM
jim putman's Avatar
jim putman jim putman is offline
Washington State Director
 
Join Date: Jan 2009
Location: puyallup wa.
Posts: 1,527
Default

First I would check your ignition switch and make sure you have power there. Should be a hot lead (from batt) coming in there and then going out in the acc and ign side of the switch (when key is turned) Next would be to follow the source from the batt/alt to the panel and or ignition sw. also make sure your grounds are connected from the battery to the body and drivetrain
__________________
Member #40 Hombres jeep club
Region 2 landmatters chairman
Wa. State Director PNW4WDA
Reply With Quote