View Single Post
Old 11-19-2009, 09:36 PM
warrpath4x4 warrpath4x4 is offline
Join Date: Feb 2009
Location: Prosser, WA
Posts: 154

last week i replaced my coolant bottle and heater hoses, figured since i had all this room i might as well change the spark plugs also

getting the factory press clamps off, i used a cut off wheel then used a screw driver to spread the clamp and pull them off.

then i started on some plating, side protection and getting rid of the stock tail lights with the molded plate and round lights.

thats as far as i got, last weekend was hunting and this weekend is the toy run at virtue
Reply With Quote