project A.D.D.

[warrpath4x4]

Ok so where do i begin with this, i have been asked a couple times if i have A.D.D. so thats where i get the name and you will see why. I was building the powerwagon up and then found out on fathers day that i am going to be a dad. Well a single cab pickup just wasnt going to cut it, couldnt find a extended or club cab that i could rob the cab off of so i did a little measuring. With a little wheel base adjustments i can fit my CJ6 body onto the W200 powerwagon chassis.

From the powerwagon i will be using the chassis (frame, suspension, axles, trans, brand new engine), rear fuel tank that will be moved.

From the CJ6 i will be using basicly just the body, tub, windshield, and hood. I will place the grill where i need it to clear the engine, build tube fenders, and stretch the hood to where i need it.

Of course theres alot more to this plan but im sure you all want pics.









yup there is carpet screwed down to the floors





jeep sat for a while, check out that pipe and elbow roll bar



pulled the carpet and seat out (which was held in by 2 bolts and a structural 2x4 lol), there was less damage than i thought there would be



first time getting to open the tool box



pulled the hood off and started to clean the hinges and the hood



from what i can tell there is about 8 coats of paint on this thing, im not planning on taking it all down to bare metal but i will be taking it down a few. i also cut out the first of many holes and rust spots, no rust in the hood but there were a couple ripped open areas.

[poorboy_616]

I just saw this over at L4J too. Looks like a sweet build!

[Ceg_]

Cool project Jeep.

[warrpath4x4]

Thanks, I just realized I didn't put any of the powerwagon pics in. Ill have to try to fix that tonight and maybe a spec sheet.

[warrpath4x4]

well i will be out of town this weekend so nothing will be getting done on the jeep so heres some old shots and a spec list of the project.

65 CJ6 tuxedo park model
crate 360
nv435/np205
HD44/dana 60 rear
dual batteries
dual winches
yadda yadda yadda

seats im going to run in the front


cleaned up exhaust manifolds


dirty frame


cleaned up frame


getting rid of the body pieces

[warrpath4x4]

ive been working on paint removal after work 5 and 10 minutes at a time.

before


paint removed and welded up a bunch of little holes



painted




the fenders are pretty beat up but if anyone is interested in them just let me know


last look at the sponge bob grill