Go Back   Pacific Northwest Four Wheel Drive Association > Wheeling > Racers Edge
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Racers Edge Race Repair Repeat

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-27-2011, 09:52 AM
Dianamal77's Avatar
Dianamal77 Dianamal77 is offline
Super Moderator
 
Join Date: Jan 2009
Location: Spanaway
Posts: 548
Default Competition Rule Changes 03/2011

1st All Automatic Transmission must have minimum of 3/8 conveyor belting, 1" head of flywheel to tail shaft that is securely fastened, with recommended explosion proof blankets and or bell housing, transmission cover that is SFI approved.

2nd All Competition vehicles are required to have both front and rear drivelines a minimum of inch thick by 1 inch wide with a minimum of 2 inch clearance around driveline, securely fastened. Drive line loop is to be center to 2/3 to front of vehicle.

3rd Fabrication bars: Minimum of 1 5/8 OD tubing with a minimum of 0.090 wall thickness, or 1 tubing with a minimum of 0.120 wall thickness. No Threaded fittings, Aluminum and stainless not allowed.

4th Batteries must have metal hold downs over top of battery. Secured to vehicle OEM mounts accepted in Street & Trail class, battery terminals must be protected (covered) from shorting out.
All above rule are in Effect: Immediately.

Any questions please call Dave Taylor
PNW4WDA Competition Chairman
Home 360-668-0719
Cell 206-491-0909
__________________
Diana Stafford
Overbored Racing
Cascade 4x4s
PNW4WDA and Region 2 Public Relations
Real Deal Doe Run Member
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 09:30 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.