Go Back   Pacific Northwest Four Wheel Drive Association > Tool Bag > Garage
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Garage Break it/Fix it

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-07-2009, 09:51 AM
Dogfather's Avatar
Dogfather Dogfather is offline
The One that Screws it up
 
Join Date: Jan 2005
Location: Rochester, WA
Posts: 1,866
Default C6 Behind a 6.9L Diesel ((Help))

Hey folks here is the Story

Trans went out so went to Scrapyard and bought a used one. 2 months later it started gushing fluid from the front of the trans.

Thought the worse so I went and picked up another. Had a kid install it and it immediately gushed fluid out the front.

When the kid pulled it back out he said he saw a crack in the Flex-Plate... Replaced that, and I finished the kids re-install. Gush from the front

Thinking he may have Damaged the seal I Pulled it, installed new Seal, and carefully re-installed it. Gush from the front.

Pulled it again thinking the cracked Flex-plate might have cracked the Torque converter I replaced it with the Original Tran Converter. Still gush from the front.

Pulled it again to Verify the Flex-Plate was installed properly? ( Only one way for Flex-Plate to go on.

This is where I am now Tranny on Jack looking for Suggestions as to what to check Next?????

Oh and by the way this is My Brothers truck in My Yard.
__________________
Edward Campbell
The Webmaster "Oops I did it.....My Bad"
Region 2 Director 2008-2010 Glad to help.
DogpoundOffroad
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 05:55 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.